Teledyne Everywhereyoulook BLZZRD Installation And Operation Manual Download

Page: 115 / 241

BLZZRD Portable Refrigerated Sampler

Section 5 Extended Programming

5-27

If you select “NO” when asked if you want to reset the sample

interval at enable, you will be asked if you want to continue the

countdown while disabled. You can have the sampler continue

the countdown, repeating it as often as necessary while the

sampler is disabled, or you may suspend the countdown while

disabled, resuming the countdown as the sampler is enabled. The

standard program allows the countdown to continue while dis-

abled.

5.12 Pauses/Resumes

Pause and resume settings, available in extended programming,

create an intermittent sampling schedule. A program with

pauses and resumes begins sampling at its programmed start

time, continuing until the first pause time and day of the week. It

then suspends sampling until the first resume time, when it

begins sampling again. If the start time falls within a pause

period, the sampler will not begin sampling until the next

resume time. Pause and resumes repeat weekly.
You can enter up to nine pairs of pause and resume times. The

pause and resume times shown as examples below suspend the

program between 5:00

Monday and 8:00

on Tuesday and

between 5:00

Tuesday and 8:00

on Wednesday. If the start

time is Monday at 8:00

, the sampler takes samples between

8:00

and 5:00

Monday; between 8:00

and 5:00

Tuesday; and, continues after 8:00

Wednesday. To remove

pause and resume settings from a program, select CLEAR.

A sampler running a pause/resume program resets the pacing

interval at each resume time. You can program the sampler to

take a sample at resume times.

5.13 Running Programs

To run an extended program, select run from the main menu.

You may also select YES at the RUN THIS PROGRAM NOW?

screen at the end of the programming screens.
Extended programs scheduled to start at a clock time will not

start until the programmed clock time on or after the first valid

date.

CONTINUE COUNTDOWN

WHILE DISABLED?

YES

PAUSE RESUME

1. 17:00 MO

08:00 TU

2. 17:00 TU

08:00 WE

CLEAR DONE

SAMPLE AT RESUME?

YES

Summary of Contents for Everywhereyoulook BLZZRD


















































































































































































































































Search results

Summary of Contents for Everywhereyoulook BLZZRD

Reviews:

Related manuals for Everywhereyoulook BLZZRD

Brands by name

Popular brands

Teledyne Everywhereyoulook BLZZRD, Installation And Operation Manual

Search results

Summary of Contents for Everywhereyoulook BLZZRD

Reviews:

Related manuals for Everywhereyoulook BLZZRD

Brands by name

Popular brands