Teledyne Everywhereyoulook BLZZRD Installation And Operation Manual Download

Page: 152 / 241

BLZZRD Portable Refrigerated Sampler

Section 6 Running Programs

6-24

6.8 System IDs

In addition to viewing report data and configuring reports, the

View Report option on the main menu lets you view system iden-

tification information.
The sampler reports the sampler model number, ID (identifi-

cation number), and software version number as system identifi-

cation notes. The sampler also reports the same information for

an attached module.
The model and ID numbers remain unchanged through the life of

the sampler. The ID numbers appear on the sampler’s reports

and in files created by flowlink and samplink when they inter-

rogate the sampler. The software packages use the ID number to

make sure that data from different samplers is not combined in

the same file.

The software version number changes when your sampler’s

software is updated.
The system will also list any software options that you have acti-

vated on your unit. These specialized software options are

available for purchase from Teledyne ISCO’s Special Product

Applications Department.

Example: Viewing System IDs

1. Select View Report from the Main Menu or View

Data while in the Paused state.

2. Select SYSTEM IDs and press



3. The controller will briefly display the controller ID

and if installed, the Module ID, followed by any
installed options.

Press the Stop key to return to the Main Menu at any
time.

RUN

PROGRAM

VIEW REPORT

OTHER FUCTIONS

VIEW DATA

PRINT DATA

SYSTEM IDs

CONFIGURE REPORTS

SAMPLER

6712 ID __________

HARDWARE: __
SOFTWARE: __

[MODULE TYPE]

[MODEL #] ID: __________

HARDWARE: __
SOFTWARE: __

SOFTWARE OPTIONS

[Options List]

Summary of Contents for Everywhereyoulook BLZZRD


















































































































































































































































Search results

Summary of Contents for Everywhereyoulook BLZZRD

Reviews:

Related manuals for Everywhereyoulook BLZZRD

Brands by name

Popular brands

Teledyne Everywhereyoulook BLZZRD, Installation And Operation Manual

Search results

Summary of Contents for Everywhereyoulook BLZZRD

Reviews:

Related manuals for Everywhereyoulook BLZZRD

Brands by name

Popular brands