Teledyne Everywhereyoulook BLZZRD Installation And Operation Manual Download Page 236

Page: 236 / 241

BLZZRD

™

Portable Refrigerated Sampler

Appendix E Accessories

E-3

Suction Line and Strainers

inch ID vinyl suction line with standard weighted polypropylene strainer, 25 foot length. Includes

tubing coupler.

60-9004-379

inch ID PTFE suction line with protective jacket, 25 foot length

60-2703-114

inch standard weighted polypropylene strainer

60-9004-367

inch ID CPVC strainer

60-3704-066

inch stainless steel low flow strainer

69-2903-138

inch vinyl suction line - 100 feet. Includes tubing coupler.

68-1680-058

inch vinyl suction line - 500 feet. Includes two tubing couplers.

68-1680-059

Coupler for

inch vinyl suction line. Can be used with any Teledyne ISCO Sampler.

60-3709-002

700 Series Modules

700 Series Modules plug into an BLZZRD or 6700 Series Sampler to expand monitoring capabilities. These

environmentally-sealed modules can be interchanged in the field, and can be added to the sampler at any time.

701 pH/Temperature Module

701 Module with Stainless Steel double junction combination pH probe. Includes combination pH

probe with built-in exposed temperature probe and 25 ft. cable. Also includes instruction manual.

Probe mounting hardware sold separately.

68-6700-052

701 pH/Temperature Accessories

Stainless Steel double-junction combination pH probe with built-in temperature probe. With 25 ft.

cable.

60-9004-126

720 Submerged Probe Flow Module

720 Flow Module submerged probe. Probe mounting hardware sold separately.

60-9004-030

720 Submerged Probe Accessories

Submerged probe level sensor only, measures 10 ft. level range. With 25 ft. connect cable.

60-3224-002

Submerged Probe sensor extension cable, 25 ft. For additional vented separation distance between

the sensor and the flow meter. More than one extension cable may be used provided that the total

distance, including sensor cable length, does not exceed 75 ft.

60-3224-004

Submerged Probe sensor extension cable, 50 ft. For additional vented separation distance between

the sensor and the flow meter. Total distance including sensor cable length cannot exceed 75 ft.

60-3224-005

Flume probe cap. For use in flumes built to accommodate a Teledyne ISCO probe.

60-2503-105

Sensor carrier for attaching submerged probe level sensor to Teledyne ISCO Standard Mounting

Rings.

60-3204-005

730 Bubbler Flow Module

730 Module with

inch x 25 ft. vinyl bubble line. Includes instruction manual and coupon for free

Teledyne ISCO Open Channel Flow Measurement Handbook. Bubble tube mounting hardware sold

separately.

68-6700-050

Table E-1 Accessories (Continued)

Item

Part

Number

Summary of Contents for Everywhereyoulook BLZZRD


















































































































































































































































Search results

Summary of Contents for Everywhereyoulook BLZZRD

Reviews:

Related manuals for Everywhereyoulook BLZZRD

Brands by name

Popular brands

Teledyne Everywhereyoulook BLZZRD, Installation And Operation Manual

Search results

Summary of Contents for Everywhereyoulook BLZZRD

Reviews:

Related manuals for Everywhereyoulook BLZZRD

Brands by name

Popular brands