manualshive.com logo in svg

Teledyne 400E, Instruction Manual, Page: 141 / 318

Share
Download
Teledyne 400E Instruction Manual Download Page 141

Model 400E Ozone Analyzer 
Instruction Manual 

Operating Instructions 

 

P/N 04316 Rev: B 

 

141 

 

6.10.7.

 APIcom 

APIcom, available on request or by download at 

http://www.teledyne-api.com/

, is 

an easy-to-use yet powerful interface program that allows the user to control 

access and control any on of T-API's main line of ambient and stack-gas 

instruments from a remote location. Running APIcom a user can: 

Establish a link from a remote location to an API instrument via modem, direct 

RS-232 cable or Ethernet.  

View the instrument front panel and remotely access all functions that could 

be accessed when standing in front of the instrument.  

Remotely edit system parameters and set points.  

View, graph, save and download data.  

View, retrieve, edit, save and upload data acquisition scripts or calibrator 

sequence scripts.  

Check on system parameters for trouble-shooting or quality control.  

6.10.8.

 COM Port Reference Documents 

Table 6-20:  Serial Interface Documents 

Interface / 

Tool 

Manual Title 

Part No. 

Available vie 

the Internet* 

APIcom  

APIcom User Manual 

039450000 

YES 

Multidrop 

RS-232 Multidrop Documentation 

018420000 

NO 

RS-232  

RS-232 Interface Docume ntation 

013500000 

YES 

RS-485 

This is an application specific interface. 

Contact the factory for details 

N/A 

N/A 

* The APIcom User’s Manual and the RS-232 Interface Documentation may be  

downloaded from out website at 

http://www.teledyne-api.com/

. 

Summary of Contents for 400E































































































































































































































































































































Reviews:

No comments