Modulation Analysis (Demod Mode)
3- 46
WCA230A & WCA280A User Manual
Restrictions of Use.
H
When the modulation type is P25 C4FM, the analysis is performed only for
the span of 20 kHz and 50 kHz. For the 50 kHz span, Acquisition Length in
the Timing menu must be set to greater than 25.6 ms.
H
When the modulation type is OQPSK, set the span so that the sampling rate
is more than three times as fast as the symbol rate. The sampling rate varies
according to span setting. For the detail, refer to Table A--9 in
Appendix A
.
Modulation Parameters...
Sets the following modulation parameters:
Symbol Rate.
Enters the symbol rate for demodulating digitally-modulated
signals. Symbol rate and bit rate are related as follows:
(Symbol rate) = (Bit rate)/(Number of bits per symbol)
For example, the number of bits per symbol is 3 for 8PSK.
Measurement Filter...
Selects a filter for demodulating a digitally-modulated
signal:
H
None (no filter)
H
Root Raised Cosine
Reference Filter...
Selects a filter for creating a reference signal:
H
None (no filter)
H
Raised Cosine
H
Gaussian
H
Half Sine
Refer to
Process Flow for Digitally-Modulated Signals
on page 3--48 for the
measurement and reference filters.
Filter Parameter.
Enters an
α
/BT value for the Measurement Filter and
Reference Filter. Range: 0.0001 to 1
Auto Modulation Depth.
Valid when the modulation type (refer to page 3--45)
is ASK. Determines whether to automatically detect or manually set the
modulation depth used to distinguish between the two states of an ASK signal.
H
On.
Default
. Automatically calculates the modulation depth for the analysis
range and displays the value in the Modulation Depth side key.
H
Off.
Sets the modulation depth using the Modulation Depth side key.
Summary of Contents for WCA200A
