Time Analysis (Time Mode)
3- 104
WCA230A & WCA280A User Manual
Use the following procedure to perform the signal source analysis.
NOTE
. If you use a signal input
(
INPUT
→
Signal Input Port...
)
other than RF,
the measurements are not guaranteed.
1.
Press the
TIME
key on the front panel.
2.
Select
Signal Source Analysis
using the side keys.
3.
Select a measurement item by pressing the side key.
For example, press the
Phase Noise
side key to perform the phase noise
measurement.
4.
Adjust the amplitude and frequency to display the measurement waveform.
Refer to page 3--119 for setting frequency and span.
Refer to page 3--127 for setting amplitude.
5.
Set the analysis range in the overview.
(This is not necessary in the Phase Noise and the Spurious measurements.)
Refer to page 3--30 for details of the analysis range settings.
If you use the zoom function, do these steps:
H
Press the VIEW:
DEFINE
key.
H
Press the
Overview Content...
side key and select
Zoom
.
Refer to
Zoom Function
on page 3--24 for setting the analysis area on the
spectrogram with the zoom function.
6.
Press the
MEAS SETUP
key and set the measurement parameters.
Refer to
Meas Setup Menu
in each measurement description.
7.
Press the
Analyze
side key and carry out the analysis.
(This is for the Real-Time Phase Noise and Real-Time Spurious measure-
ments only.)
Selecting the Phase Unit.
The phase unit is set to degrees by default. It is possible
to select degrees or radians as the unit using the following procedure:
1.
Press the
SYSTEM
key on the front panel.
2.
Press the
Instrument Setup...
side key.
3.
Press the
Angular Units
side key to select degrees or radians.
Basic Procedure
Summary of Contents for WCA200A
