Setting Amplitude
3- 136
WCA230A & WCA280A User Manual
Creating an Amplitude Correction File on a Computer.
Use word processing
software on a computer to create a text file with the extension “.cor”.
Be sure to use the correct file format (refer to
File Format
on page 3--134) and
follow the
Rules for Creating an Amplitude Correction File
on page 3--135.
For information about performing amplitude correction, refer to page 3--140.
Creating Correction Data on the Analyzer Screen.
The procedure for entering new
correction data or modifying existing data on the screen is as follows. Refer also
to
Rules for Creating an Amplitude Correction File
on page 3--135.
1.
Press the
AMPLITUDE
key on the front panel.
2.
Press the
Corrections...
side key.
3.
To edit an existing file:
Refer to page 3--239 for file handling.
a.
Press the
Load Table
side key to load the file.
b.
Press the
Edit Table...
side key.
4.
To enter new data:
See Figure 3--92.
a.
Press the
Frequency
side key and enter the frequency of a correction
point.
b.
Press the
Amplitude
side key and enter the amplitude correction value at
the correction point.
c.
Press the
Add New Point
side key.
A new row is added, containing the same frequency and amplitude
correction values as the previous row. Modify the values appropriately.
NOTE
. If you set the same frequency as the previous row, the amplitude correc-
tion value in the previous row will be overwritten the next time you press the Add
New Point side key.
It is not necessary to enter correction data in order by frequency. The rows are
automatically reordered in ascending order of frequency.
d.
Repeat step c to enter the frequency and amplitude correction values for
all points.
e.
Press the
Done Editing Table
side key.
The input is accepted and a new row is added.
Summary of Contents for WCA200A
