Tektronix WCA200A, User Manual

Page: 263 / 454

Setting Amplitude
WCA230A & WCA280A User Manual
3- 137
5. To add correction data:
a. Press the Select Point To Edit side key and turn the general purpose
knob to move the cursor to the last row (empty) in the table.
b. Perform step 4 to enter the frequency and amplitude correction values.
Frequency Amplitude correction value
Add New Point
Deletes all data in the table.
Delete Point
Deletes a line.
Select Point To Edit
Selects a line.
Frequency
Inputs frequency of the point.
Amplitude
Inputs correction value.
Done Editing Table
Registers the input values
and adds a line.
Clear Table
Deletes all data in the table.
Figure 3- 92: Amplitude correction data input
6. To modify input data: Press the Select Point To Edit side key and turn the
general purpose knob to move the cursor to the row to be modified. Use the
following side keys as needed:
H
To modify a frequency, use the
Frequency
side key.
H
To modify an amplitude, use the Amplitude side key.
H
To delete a row, press the
Delete Point
side key.
H
To delete all data in the table, press the Clear Table side key.
7. Repeat steps 5 through 6 as needed.