Time Analysis (Time Mode)
WCA230A & WCA280A User Manual
3- 101
Frequency Recovery.
For the Pulse-Pulse Phase and the Frequency Deviation
measurements only.
Selects the frequency correction method.
H
1st.
Sets the correction value automatically, using the first pulse in the
analysis range. The value is displayed in the
Frequency Offset
side key.
H
User.
Sets the correction value using the
Frequency Offset
side key
described below.
H
Off.
Default.
Disables the frequency correction.
Frequency Offset.
Sets the frequency correction value when you select User in
Frequency Recovery described above.
The measurement waveform is displayed in the subview with the yellow lines
(bold lines in Figure 3--73 on page 3--102) indicating the measurement points.
Also, the pulse detection threshold (
MEAS SETUP
→
Detection Threshold
) is
shown with the green arrow. These guidelines can be turned on or off by
VIEW:
DEFINE
→
Guidelines
.
Measurement Screen
Summary of Contents for WCA200A
