Tektronix PWS4205, Programmer'S Manual

Page: 28 / 90

Commands Listed in Alphabetical Order
Examples
FETC:CURR?
might return 0.09998, which would be the current measured at the
output of t he power supply in amperes.
FETCh:VOLTage[:DC]? (Query Only)
This command returns the last measured output voltage stored in the
communications buffer of the power supply. A new measurement is not initiated
by this command.
Group
Measurement
Syntax
FETCh:VOLTage[:DC]?
Related Commands
MEASure:VOLTage[:DC]?
Returns
<NR2>
is the measured output voltage in volts.
Examples
FETC:VOLT?
might return 5.0011, which would be the measured voltage across
the power supply outputs in volts.
FETCh[:SCALar]:POWer? (Query Only)
This command returns the last measured output current stored in the
communications buffer of the power supply. A new measurement is not initiated
by this command. The power calculation in the instrument is performed
approximately every 100 ms. Insure that the voltage and current are stable longer
than this for good results.
Group Measurement
Syntax
FETCh[:SCALar]:POWer?
Returns
<NR2>
is the measured output power in watts.
Examples
FETCh:POW?
might return 6.01667, which would be the power measured at the
output of t he power supply in watts.
2-16 PWS4205, PWS4305, PWS4323, PWS4602, and PWS4721 Power Supply Programmer Manual