Tektronix PWS4205, Programmer'S Manual

Page: 46 / 90

Commands Listed in Alphabetical Order
MIN
sets the voltage to the minimum level (0 V).
MAX
sets the voltage to the maximum level (note that the maximum level may be
somewhat higher than the nameplate).
DEF
is the default level (1 V).
Returns
NR2
is the voltage setting in volts.
Examples
VOLTAGE:MIN
VOLTAGE?
might return
1.05
, which would be the voltage setting in volts.
[SOURce:]VOLTage:PROTection[:LEVel]
This command sets the over voltage protection (OVP) threshold level.
Group Source
Syntax
[SOURce:]VOLTage:PROTection[:LEVel] {<voltage>|MIN|MAX|DEF}
[SOURce:]VOLTage:PROTection[:LEVel]?
Related Commands
[SOURce:]VOLTage:PROTection:STATe , [SOURce:]VOLTage:RANGe
Arguments
<voltage>::=<NRf><units>
where
<NRf>
is a fl exible decimal that speci fi es the OVP threshold, ranging from 0 to
the maximum OVP level
<units> ::={V|mV}
MIN
: sets the minimum OVP level (1 V).
MAX
: sets the maximum OVP level, which is approximately 10% higher than the
maximum output voltage rating of the power supply.
DEF
: sets the OVP level to the default level, which is equal to
MAX
.
Returns
<NR2>
is the OVP threshold in volts.
MIN
: set to minimum OVP level.
MAX
: set to maximum OVP level.
2-34 PWS4205, PWS4305, PWS4323, PWS4602, and PWS4721 Power Supply Programmer Manual