Tektronix PWS4205, Programmer'S Manual

Page: 50 / 90

Commands Listed in Alphabetical Order
<NR1>
is a decimal integer ranging from 0 through 255. The binary bits of the
OENR are set according to this value.
Returns
<mask>
Examples
STATUS:OPERATION:ENABLE
8
STATUS:OPERATION:ENABLE
? might return
8
, which would indicate that only
the Constant Current bit of the Operation Event Register would affect the OPER
bit of the Status Byte Register.
STATus:OPERation[:EVENt]? (Query Only)
This command returns the contents of the operation event register (OEVR). After
executing this command the operation event register is reset. Details about status
registers are available in this manual. (See page 3-1,
Status and Events .)
Group Status
Syntax
STATus:OPERation[:EVENt]?
Related Commands STATus:OPERation:CONDition? , STATus:OPERation:ENABle
Returns
<NR1>
is a decimal integer representation of the contents of the Operation Event
Register (OEVR), ranging from 0 to 255.
Examples
STATUS:OPERATION:EVENT?
might return
10
, which indicates that the power
supply is waiting for trigger and is in a constant current mode.
STATus:QUEStionable:CONDition? (Query Only)
This command returns the contents of the questionable condition register (QCR).
Details about the QCR are available in this manual. (See page 3-1,
Status and
Events .)
Group Status
Syntax
STATus:QUEStionable:CONDition?
2-38 PWS4205, PWS4305, PWS4323, PWS4602, and PWS4721 Power Supply Programmer Manual