Tektronix PWS4205, Programmer'S Manual

Page: 21 / 90

Command Groups
Table 2-7: System commands (cont.)
Header Description
SYSTem:REMote Set to remote mode
SYSTem:RWLock Set to remote mode and lock front-panel
SYSTem:LOCal Set to front-panel control mode
CONFigure:SOUNd[:STATe] Set key beep sound on or off
Diagnostic Commands
The power supply includes a self test function that may be used to con fi rm that it
is functioning as expected. A table of error codes that may be returned by the self
test are given in the
Messages and Codes section. (See page 3-8.)
Table 2-8: Diagnostic commands
Header Description
*TST? Perform self-test and return result status
Synchronization Commands
Table 2-9: Synchronization commands
Header Description
*OPC Set/query operation complete
*WAI
Wait to continue
Trigger Commands
Trigger commands are used to determine the timing of list mode sequences.
Table 2-10: Trigger commands
Header Description
TRIGger[:IMMediate] Forces an immediate trigger event
TRIGger:SOURce Set/query the source of trigger signal
*TRG Generates a trigger event
PWS4205, PWS4305, PWS4323, PWS4602, and PWS4721 Power Supply Programmer Manual 2-9