Specification
—DM 5010
Performance
Check
in this manual. Information given
in the
Supplemental Information
and Description columns of
the
following
tables is provided for user information only and
should
not
be interpreted to be Performance Check require
ments.
The information
under Electrical Characteristics ap
plies to
both front-panel and rear-interface measurements,
unless otherwise noted.
NOTE
For
measurements to
specified accuracy, internal ad
justments should be performed after
1000 hours
of
operation or every six
months if used infrequently. Re
fer
to the Adjustment
Procedure in this manual.
Table
1-2
ELECTRICAL CHARACTERISTICS
Characteristics
Performance
Requirements
Supplemental
Information
DC VOLTS
ACCURACY for
the 200 mV,
2 V,
20
V, 200
V, and 1000 V ranges:
Normal
Conversion Rate
(3
readings per second)
+
18°C to
+28°C
200 mV
range
± (0.015% of reading
+ 0.01% of full
scale)
2
V
through
200 V ranges
±(0.015% of
r
0.005% of full
scale)
1000 V range
±(0.020% of reading
+ 0.010% of full
scale)
0°C to
+18°C,
+ 28°C
to
+ 50°C
200
mV
range
±(0.06%
of
r 0.035% of full
scale)
For the typical accuracy for a given tem
perature
in this range, add to the
+18°C
to
-r28°C
accuracy, ±(0.002% of read
ing + 0.001% of full scale)/0C
deviation
from
+28°C or +1B°C.
2 V through 200 V ranges
±(0.06%
of r 0.03% of full
scale)
1000 V range
±(0.065% of
r
0.035% of full
scale)
Fast
Conversion
Rate
(26
readings per second)
+
18°C to
+28°C
200
mV to 200 V
ranges
±(0.05% of reading
+ 0.05% of full
scale)
1000 V range
±(0.05% of reading
+ 0.1% of full scale)
0°C to
+ 18°C,
+ 28°C to
+ 50°C
200 mV to 200 V ranges
±(0.1% of
reading
+ 0.1% of full scale)
1000 V
range
±(0.1% of
reading
+ 0.15% of full scale)
1-2
Summary of Contents for DM 5010
