Tektronix CSA8000B Series, User Manual

Page: 31 / 354

Installation
CSA8000B & TDS8000B User Manual
1- 13
Table 1- 1: Additional accessory connection information
Item Description
Monitor If you use a non-standard monitor, you may need to change the
the Windows display settings to achieve the proper resolution
for your monitor.
Printer Connect the printer to the EPP (enhanced parallel port)
connector directly. If your printer has a DB-25 connector, use
the adapter cable that came with your printer to connect to the
EPP connector. For information on printer usage, see
Printing
Waveforms on page 3-126.
Other Refer to the Application release notes on your System Rebuild
CD for possible additional accessory installation information
not covered in this manual.
Power On the Instrument
Follow these steps to power on the instrument for the first time.
1. Check that the line fuses are correct for your application. Both fuses must be
the same rating and type. Fuse types require a unique cap and fuseholder. See
Table 1--2 and Figure 1--4.
Table 1- 2: Line fuses
Fuse type Rating Fuse part number
Cap & fuseholder
part number
0.25 x 1.250 inch 8 A, fast blow, 250 V 159-0046-00 200-2264-00
5 x 20 mm 6.3 A, fast blow, 250 V 159-0381-00 200-2265-00
Fuses
AC power Power switch
Figure 1- 4: Line fuse and power cord connector locations, rear panel