Tektronix CSA8000B Series, User Manual

Page: 29 / 354

Installation
CSA8000B & TDS8000B User Manual
1- 11
Large-module compartments (2)
Small-module compartments (4)
Connect ESD wrist strap here
Figure 1- 1: Compartments for sampling modules
You can install up to two large sampling modules and four small modules for a
total of 10 inputs. Of these 10 inputs, only eight inputs can be active at one time
(see Figure 1--2, top two configurations). Also, note that installing a single large
module in either compartment disables the first small-module compartment (see
note). This configuration (see Figure 1--2, bottom configuration) limits the input
count to seven—one from the large, six from the small compartments.
NOTE
. Power is still provided to this small slot, which does allow an 80A01 to
be functional in this slot even when a large module is installed.
Eight channels: Two large modules and
three small modules
CH 1 CH 2
N.A.
1
CH 6 CH 3 CH 8 CH 5 CH 7 N.A. CH 4
CH 1 CH 2 CH 6 CH 3 CH 8 CH 5 CH 7
N.A.
CH 4
N.A.
Eight channels: No large and four
small modules
Seven channels: One large module,
installed in either compartment, and
three small modules
CH 1/N.A.
N.A. CH 6 CH 3 CH 5 CH 7 N.A. CH 4
CH 2/N.A.
CH 8
1
Not Available
Figure 1- 2: Maximum inputs in three configurations
Install probes, cables, and other connection accessories to your sampling
modules as appropriate for your application and sampling module. Again,
consult your sampling-module and connection-accessory manuals. Continue with
the next section after installing the sampling modules.
Maximum Configuration