Display Waveform Data
5.
Turn multipurpose knob
b
to move the selected
channel.
NOTE.
The display of the channel (or group) only
moves after you stop rotating the knob.
6.
To change the scale (height) of the digital
channels, push the lower-menu
Height
button.
NOTE.
The
S
(Small) selection will display
each waveform at 0.2 divisions tall. The
M
(Medium) selection will display each waveform
at 0.5 divisions tall. The
L
(Large) selection will
display each waveform at 1 division tall.
L
only
works if there is enough room in the display to
display the waveforms. You can display up to 10
L
waveforms at one time.
7.
You can label individual digital channels for
easier identi
fi
cation. (See page 82,
Channels and Buses
Tektronix 4000 Series Oscilloscopes User Manual
165
Summary of Contents for 4000 Series
