Tektronix 4000 Series, User Manual

Page: 117 / 326

Acquire the Signal
2. Push Trigger Menu and enter trigger
parameters. (See page 124, Choosing a
Trigger Type .)
You can display bus information without
triggering on the bus signal.
Setting Up Bus Parameters
NOTE. For all serial bus sources, use channels 1 through 4, or D15 through D0.
To set up bus parameters:
1. Push B1 or B2 to bring up the lower-bezel bus
menu.
NOTE. You can also push B3 or B4 on the
MSO4000 series.
Tektronix 4000 Series Oscilloscopes User Manual 99