Analyze Waveform Data
Quick Tips.
You can copy trigger settings to search for other locations in your acquired waveform that meet the trigger conditions.
You can also copy search settings to your trigger.
Custom (User) marks are saved with the waveform when the waveform is saved and when the setup is saved.
Automatic search marks are not saved with the waveform when the waveform is saved. However, you can easily recapture
them by reusing the search function.
The search criteria are saved in the saved setup.
The Wave Inspector includes the following search capabilities:
Search
Description
Edge
Searches for edges (rising or falling) with a user-speci
fi
ed threshold level.
Pulse Width
Searches for positive or negative pulse widths that are >, <, =, or
≠
a user speci
fi
ed pulse width.
Runt
Searches for positive or negative pulses that cross one amplitude threshold but fail to cross a
second threshold before crossing the
fi
rst again. Search for all runt pulses or only those with a
duration >, <, =, or
≠
a user speci
fi
ed time.
Logic
Search for a logic pattern (AND, OR, NAND, or NOR) across multiple waveforms with each input
set to either High, Low, or Don’t Care. Search for when the event goes true, goes false, or
stays valid for >, <, =, or
≠
a user speci
fi
ed time. Additionally, you can de
fi
ne one of the inputs
as a clock for synchronous (state) searches.
Setup & Hold
Search for violations of user speci
fi
ed Setup and Hold times.
212
Tektronix 4000 Series Oscilloscopes User Manual
Summary of Contents for 4000 Series
