Display Waveform Data
Setting Input Parameters
Use the vertical controls to select waveforms, adjust the waveform vertical position and scale, and set input parameters.
1.
Push a channel menu button
1
,
2
,
3
, or
4
to
bring up the vertical menu for the designated
waveform. The vertical menu only affects the
selected waveform.
Pushing a channel button will also select or
cancel that waveform selection.
2.
Push
Coupling
repeatedly to select the
coupling to use.
Use DC coupling to pass both AC and DC
components.
Coupling
DC
| AC
Impedance
1M
Ω
| 50
Ω
Invert
On |
Off
Bandwidth
Full
(1) Label
More
Use AC coupling to block the DC component
and show only the AC signal.
Use Ground (GND) to display the reference
potential.
156
Tektronix 4000 Series Oscilloscopes User Manual
Summary of Contents for 4000 Series
