Tektronix 071-0957-03, User Manual

Page: 191 / 254

Appendix A: Specifications
TDS3000B Series User Manual
A- 13
Specifications (cont.)
EMC certifications and compliances
EMC Compliance:
Australia/New Zealand Meets the intent of Australian EMC Framework as demonstrated
to the following specification:
AS/NZS 2064.1/2
EMC Compliance:
Russia This product was certified by the GOST ministry of Russia to be
in compliance with all applicable EMC regulations.
FCC Compliance:
U.S.A. Emissions comply with FCC Code of Federal Regulations 47,
Part 15, Subpart B, Class A Limits
1
Emissions that exceed the levels required by this standard may occur when this
equipment is connected to a test object.
2
To ensure compliance to the standards listed above, attach only high quality
shielded cables to this instrument. High quality shielded cables typically are braid
and foil types that have low impedance connections to shielded connectors at
both ends.
3
The increase in trace noise while subjected to a test field (3 V/m over the
frequency range 80 MHz to 1 GHz, with 80% amplitude modulation at 1 kHz) is
not to exceed 8 major divisions peak-to-peak. Ambient conducted fields may
induce triggering when the trigger threshold is offset less than 4 major divisions
from ground reference.
4
The increase in trace noise while subjected to a test field (3 V/m over the
frequency range 150 kHz to 80 MHz, with 80% amplitude modulation at
1 kHz) is not to exceed 2 major divisions peak-to-peak. Ambient conducted fields
may induce triggering when the trigger threshold is offset less than
1 major divisions from ground reference.