Appendix A: Specifications
A- 2
TDS3000B Series User Manual
Specifications (cont.)
Inputs
Input coupling
DC, AC, or GND
Channel input remains terminated when using GND coupling.
Input impedance,
DC coupled
1 M
Ω
±
1% in parallel with 13 pF
±
2 pF, TekProbe compatible
50
Ω
±
1%; VSWR
≤
1.5:1 from DC to 500 MHz, typical
Maximum voltage at
i
BNC ( M
Ω)
Overvoltage category
Maximum voltage
g
input BNC (1 M
Ω)
CAT I Environment (refer to
page A--14)
150 V
RMS
(400 V
pk
)
CAT II Environment (refer to
page A--14)
100 V
RMS
(400 V
pk
)
For steady-state sinusoidal waveforms, derate at 20 dB/decade
above 200 kHz to 13 V
pk
at 3 MHz and above.
Maximum voltage at
input BNC (50
Ω)
5 V
RMS
with peaks
≤ ±
30 V
Maximum floating
voltage
0 V from chassis (BNC) ground to earth ground, or
30 V
RMS
(42 V
pk
) only under these conditions: no signal voltages
>30 V
RMS
(>42 V
pk
), all common leads connected to the same
voltage, no grounded peripherals attached
Channel-to-channel
crosstalk, typical
Measured on one channel, with test signal applied to another
channel, and with the same scale and coupling settings on each
channel
Frequency range
Crosstalk
≤
100 MHz
≥
100:1
≤
200 MHz
≥
50:1
≤
300 MHz
≥
50:1
≤
400 MHz
≥
30:1
≤
500 MHz
≥
30:1
≤
600 MHz
≥
30:1
Summary of Contents for 071-0957-03
