ENGLISH using TecraM1online.dot –– Printed on 24.02.2003 as 02_200UK
Power and Power-Up Modes
6-15
Tecra M1
User Token field
■
Create
(button)
You can use an SD card token, instead of entering the password. After
you have registered a password, insert an SD card and click
Create
.
You can use an SD card of any capacity, but it must be formatted
correctly.
If an unformatted card or one with an incompatible format is inserted,
you will be prompted to format it with a tool named TOSHIBA SD
Memory Card Format. To start the format tool, point to or click the
following items:
Windows XP
Start -> All Programs -> TOSHIBA SD Card Utilities
-> TOSHIBA SD Memory Card Format
When you format an SD Memory card, all data will be deleted. Be sure to
save data on the card to other media before you format the card.
■
Disable
(button)
Click this button to invalidate the token. You cannot revalidate old
tokens, but you can use the same SD cards to create new tokens.
Supervisor password
If you set a supervisor password, some functions might be restricted
when a user logs on with the user password. To set a supervisor
password, execute the file TOSUP.EXE. The file is located at:
C:\Program Files\Toshiba\Windows Utilities\SVPWTool\TOSUP.EXE
This utility lets you do the following:
■
Register, delete or change the supervisor password.
■
Create or invalidate a supervisor password token
This function in the Supervisor password utility lets you invalidate only
supervisor tokens or all tokens, including user and supervisor tokens.
■
Specify restrictions for general users.
Starting the computer by password
If you registered a password, there are two ways to start the computer:
■
Insert a password token before you turn on the computer. The
computer will start normally, without displaying a password prompt.
■
Enter the password manually.
The password is necessary only if the computer was shut down in boot
mode. It is not needed in Hibernation or Standby mode.
To enter a password manually, follow these steps:
1. Turn on the power as described in Chapter 3,
Getting Started
.
The following message will appear in the LCD:
Password=
