ENGLISH using TecraM1online.dot –– Printed on 24.02.2003 as 02_200UK
Getting Started
3-11
Tecra M1
Windows XP
1. Click
start
.
2. Select
Turn Off Computer
.
3. Open
the
Turn Off Computer
dialog box.
Hibernate
is not
displayed.
4. Press
the
Shift
key. The
Standby
item will change to
Hibernate
.
5. Select
the
Hibernate
.
Automatic Hibernation
The computer will enter Hibernate mode automatically when you press
the power button or close the lid. First, however, make the appropriate
settings according to the steps below.
1. Open
the
Control Panel
.
2. In Windows XP, open
Performance and Maintenance
and open
TOSHIBA Power Saver
.
3. Select
the
Hibernate
window, select the
Enable Hibernate support
check box and click the
Apply
button.
4. Select
the
Power Save Modes
window.
5. Double-click
Power Mode (Full Power, Normal, etc.)
and open the
System Power Mode
window.
6.
Enable the desired Hibernation settings for
When I press the power
button
and
When I close the lid
.
7.
Click the
OK
button.
Data save in hibernation mode
When you turn off the power in hibernation mode, the computer takes a
moment to save current memory data to the hard disk. During this time,
the
Disk
indicator will light.
After you turn off the computer and memory is saved to the hard disk,
turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
Standby mode
In standby mode, the power remains on, but the CPU and all other
devices are in sleep mode.
If the computer is not used or accessed in any way, including receipt of e-
mail, for 30 minutes when the AC adaptor is connected, the computer will
automatically enter Standby mode (TOSHIBA Power Saver default).
