Tecra M1 User Manual Download Page 67

Page: 67 / 218

ENGLISH using TecraM1online.dot –– Printed on 24.02.2003 as 02_200UK

Operating Basics

4-3

Tecra M1

Removing the AccuPoint cap

2. Position a new cap on the peg and press it into place.

The peg is square, so be careful to align the cap’s square hole with the
peg.

Using the USB diskette drive

A 3 1/2" diskette drive connects to the computer’s USB port. It
accommodates 1.44-megabyte or 720-kilobyte diskettes. Refer to
Chapter 2,

Grand Tour

, for more information.

Connecting 3 1/2" diskette drive

To connect the drive, plug the diskette drive connector into a USB port.

Make sure the connector is right side up and properly aligned with the
socket. Do not try to force the connection, doing so can damage the
connecting pins.

Summary of Contents for M1



























































































































































































































Search results

Summary of Contents for M1

Reviews:

Related manuals for M1

Brands by name

Popular brands

Tecra M1, User Manual

Search results

Summary of Contents for M1

Reviews:

Related manuals for M1

Brands by name

Popular brands