Tecra M1 User Manual Download Page 116

Page: 116 / 218

ENGLISH using TecraM1online.dot –– Printed on 24.02.2003 as 02_200UK

HW Setup

7-3

Tecra M1

Boot Priority

Boot Priority Options

This option sets the priority for booting the computer. Select from the
following settings:

HDD

−>

FDD

−>

CD-ROM

−>

LAN

The computer looks for bootable files in the
following order: HDD, diskette drive, CD-ROM*
and LAN. (Default)

FDD

−>

HDD

−>

CD-ROM

−>

LAN

The computer looks for bootable files in the
following order: diskette drive, HDD, CD-ROM*
and LAN.

HDD

−>

CD-ROM

−>

LAN

−>

FDD

The computer looks for bootable files in the
following order: HDD, CD-ROM*, LAN and
diskette drive.

FDD

−>

CD-ROM

−>

LAN

−>

HDD

The computer looks for bootable files in the
following order: diskette drive, CD-ROM*, LAN
and HDD.

CD-ROM

−>

LAN

−>

HDD

−>

FDD

The computer looks for bootable files in the
following order: CD-ROM*, LAN, HDD, diskette
drive.

CD-ROM

−>

LAN

−>

FDD

−>

HDD

The computer looks for bootable files in the
following order: CD-ROM*, LAN, diskette drive
and HDD.

In this computer, CD-ROM refers to the Slim Select Bay optical media

drive.

To change the boot drive, follow the steps below.

1. Hold down

F12

and boot the computer.

The following menu will be displayed with the following icons: Built-in
HDD, Slim Select Bay HDD, CD-ROM, FDD, Network (LAN), PCA (ATA)
card boot.

A bar will appear only under the selected device.

3. Use the left/right cursor keys to highlight the boot device you want

and press

Enter

Summary of Contents for M1



























































































































































































































Search results

Summary of Contents for M1

Reviews:

Related manuals for M1

Brands by name

Popular brands

Tecra M1, User Manual

Search results

Summary of Contents for M1

Reviews:

Related manuals for M1

Brands by name

Popular brands