ENGLISH using TecraM1online.dot –– Printed on 24.02.2003 as 02_200UK
Optional Devices
8-20
Tecra M1
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below.
a. Click
start
and click
Control Panel
.
b. Double-click the
Display
icon to open the Display Properties window.
c. Click
the
Settings
tab and click the
Advanced
button.
d. Click the
Display Device
tab.
e. Select
the
TV Standard
that your TV supports.
Changing the resolution
If you want to change the resolution, follow the steps below.
1. Open
Display properties
and select the
Settings
tab.
2. Select
Advanced
.
3. Select
the
Adapter
tab, then select
List all modes
.
4. Select a resolution from the menu.
i.LINK (IEEE1394)
i.LINK (IEEE1394) is used for high-speed data transfer for a range of
compatible devices such as
■
Digital video cameras
■
Hard disk drives
■
MO drives
■
CD-RW drives
i.LINK uses a four-pin connector, which does not carry electric current.
External devices will need their own power supply.
Precautions
■
Make a back-up of your data before transferring it to the computer.
There is a possibility that the original data will be damaged. There is a
particular risk that some frames will be deleted in the case of digital
video transfer. TOSHIBA assumes no liability for such loss of data.
■
Do not transfer data in areas where static electricity is easily
generated or in areas subjected to electronic noise. Data can be
destroyed.
■
If you are transferring data through an IEEE1394 hub, do not connect
or disconnect other devices from the hub during data transfer. There is
a likelihood that data will be damaged. Connect all devices to the hub
before you turn on the computer’s power.
■
You may not use any copyrighted video or music data copied from a
video camera except for your personal enjoyment.
