Tecra M1 User Manual Download Page 64

Page: 64 / 218

ENGLISH using TecraM1online.dot –– Printed on 24.02.2003 as 02_200UK

Getting Started

3-14

Tecra M1

2. Hold down the

F12

key and turn on the power. When the TOSHIBA

logo appears, release the

F12

key.

3. Use the left or right cursor key to select the CD-ROM icon in the

display menu. For details, refer to the

Boot priority

section in

Chapter 7,

HW Setup

4. Follow the on-screen instructions.

5. If your computer came with additional software installed, this software

can not be recovered from the Recovery CD. Re-install these
applications (e.g. Works Suite, DVD Player, Games, etc) separately
from other media.

Restoring Toshiba utilities and drivers

If Windows is working properly, individual drivers or applications can be
separately restored. Use the Tools & Utilities CD-ROM according to
instructions in the booklet contained in the CD box to reinstall Toshiba
utilities and drivers.

Summary of Contents for M1



























































































































































































































Search results

Summary of Contents for M1

Reviews:

Related manuals for M1

Brands by name

Popular brands

Tecra M1, User Manual

Search results

Summary of Contents for M1

Reviews:

Related manuals for M1

Brands by name

Popular brands