TECNOMOTOR 810, User Manual, Page: 65 / 368

11
3.3 Analyser configuration
Access the configuration menu when you want to make some setting changes
(change date and time) and every time you change the configuration used (e.g.
if you switch from the inductive clamp revolution counter to the M.C.T.C.NET
revolution counter).
3.3.1 Setting workshop data
During the initial message when the instrument is switched on, press the F
key, or press "ESC" twice if you are on the test type selection page. The menu
shown in the figure below will appear.
► Setup
Service
Select Setup and press the confirmation key ( ).
► Setup
Service
Select "Workshop data", and press the confirmation key
Contagiri
Ora e Data
( ).
► Dati Officina
…
Select the workshop related items, and select them by
► Nome Officina
pressing the confirmation button ( ).
Indirizzo
Città
…
3.3.2 Setting time and date
During the displaying of the initial message when the instrument is switched on,
press the ESC key or the F function key, or from the main menu of the
instrument press the ESC key twice.
Select Setup and press the confirmation key ( ).
► Setup
Service
Select "Time and Date", and press the confirmation key
Revolution
counter
( ).
► Time and Date
Workshop Data
…
To change the time
select “Time”, and press the
► Time
confirmation key ( ).
Date