96
Operation – Basics
Device overview
The display
(1)
on the front shows information about sensor measurements, menu position,
parameters and such.
The bar
(2)
on the right side of the display moves along with the vertical position in the cur
-
rently opened menu (= scroll bar).
The wheel
(3)
to the right of the menu serves to navigate through menus. Twisting it clock
-
wise navigates downwards in a menu, twisting it counter-clockwise navigates upwards.
Pushing the wheel
(3)
down opens the currently selected menu/enables changing the cur
-
rently selected value/parameter. (= Enter button)
Pushing the button
(4)
left of the wheel leaves the current menu. (= Back button)
Pushing the „Enter button“
(3)
or the „Back button“
(4)
is related to the value/menu point
that‘s framed.
The three LEDs
(5)
above one another, on the right side of the display, are indicators for the
status of the outputs. A green LED indicates an active output.
The single LED
(6)
between the display and the wheel indicates the status of the device and
the system. Green flashing indicates a booting up of the device. Constant green light indi
-
cates normal operation. Orange indicates a „Message“, e.g. an active excess collector tem
-
perature limiter. Red indicates an „Error“ such as the loss of any signal from a DL-sensor. If
a message or error is present, the menu
System status
(bottom of the
Overview
) offers fur
-
ther details.
At a short push of the Reset button
(7)
, the device reboots. To carry out a total reset of the
device, push the button until the status LED stops rapidly flashing orange and begins slowly
flashing in red.
Summary of Contents for UVR65
Page 2: ......
