Technicolor TB30, Administrator'S Manual

Page: 81 / 266

TB30s SIP Administrator Guide v1.3
Page 74 of 259
PhoneLock
PhoneLock flag is used for enable/disable phone lock function. If the phone is locked, after
power reset it must be still locked.
Key response
Any key is pressed except number key and “Unlock” soft key, it will display “Phone Locked”
when phone is locked.
When number key is pressed, user goes off-hook, headset or handsfree key pressed, it will check
for EmgDialPlan.
If it is not in the dial plan, it displays “Phone Locked”. Otherwise, it will let the phone to dial the
number.
During dialing the emergency number call log and phonebook function are not available. And if
press callLog and Phbook softkey or Hardkey will be ignore. It can only dial out emergency
number.
During Emergency if press Tran or conf or New Call only emergency call number can be dial
out. If user dials a normal number, it displays “Phone Locked”.
Incoming call cannot be received in the case of dial out emergency number. The phone will not
alert the user that is an incoming call. If the incoming call is finished before Emergency call, it
stores the incoming call into the miss call list. Otherwise, when Emergency call is ended, the
phone will ring.
Incoming Call
When IncomingLock = 0, the phone will ring for the incoming call and the phone lock function
is temporary disable until it goes call end, on-hook or ring stop.
Date Hour Icons
Name
Phone
Unlock
Date Hour Icons
Enter a Number
Back
Date Hour Icons
01 XXXX
Talking 00:00:XX
hold Tran Conf
CallLog PhBook Endcal
Newcal
Date Hour Icons
Ringing…
XXXX
Back