Technicolor TB30 Administrator'S Manual Download Page 229

Page: 229 / 266

TB30s SIP Administrator Guide v1.3

Page 222 of 259

NTP address source configuration

In previous TB30 versions, NTP server address was either taken from the

DHCP server, or from stored values if DHCP server was not serving this
parameter.

This feature allows the administrator to decide which will be the source of

NTP address.

Feature activation

APS is currently used to control this setting.

Keyword definition and usage

The parameter governing this feature, included in the [ntp] section, is:

NtpMode

Values : 0, 1

Meaning :

0 : NTP address retrieved from stored value

1 : NTP address retrieved preferably from DHCP server

Example :

[ntp]

NTPFlag=1

NtpIP=192.43.244.18
NtpDaylight=1

NtpMode=0
NtpZoneNum=50
NtpSyncTime=1

Information shortcut-

“Menu” long press

The purpose of this feature is to facilitate Support tasks, by granting fast

access to basic phone information: HW and FW version, MAC and IP address,
etc

This information was already provided by pressing User



Information

Now, access to this submenu is also available by long pressing “Menu” key

Summary of Contents for TB30











































































































































































































































































Search results

Summary of Contents for TB30

Reviews:

Related manuals for TB30

Brands by name

Popular brands

Technicolor TB30, Administrator'S Manual

Search results

Summary of Contents for TB30

Reviews:

Related manuals for TB30

Brands by name

Popular brands