Technicolor TB30 Administrator'S Manual Download Page 179

Page: 179 / 266

TB30s SIP Administrator Guide v1.3

Page 172 of 259

B) Through APS:

For this purpose, new parameters have been included in the [sip] section of
the Common/MAC config files, to be able to configure the feature.

[sip]

CallWaitingFlg

local

CallWaitingOnSC

CallWaitingOffSC

C) Through Telnet:

For this purpose, new parameters have been created, described as follow:

sip set

CallWaitingFlg

[local|sc]

sip set

CallWaitingOnSC

( Call Waiting On star code)

sip set

CallWaitingOffSC

(Call Waiting Off star code)

Behavior

Call Waiting ON

1. Press Menu - Option - CallWaiting - Change

2. Select ON
3. The phone will send the INVITE with TO header= SC

Call Waiting OFF

1. Press Menu - Option - CallWaiting - Change
2. Select OFF

3. The phone will send the INVITE with TO header= SC

Special Services activation through DTMF

Notes:



Allowed starting from mu1



Add a new type "DTMF" (on top of existing Line and Supervised Line)

Feature Activation

A) Through the WebGui:

The activation of this feature is accessible from :

B) Through APS:

For this purpose, new parameters have been included in the [sys] section of

the Common/MAC config files, to be able to configure the feature.

[

sys

]

Current_Max_Multiline=

Summary of Contents for TB30











































































































































































































































































Search results

Summary of Contents for TB30

Reviews:

Related manuals for TB30

Brands by name

Popular brands

Technicolor TB30, Administrator'S Manual

Search results

Summary of Contents for TB30

Reviews:

Related manuals for TB30

Brands by name

Popular brands