Technicolor TB30, Administrator'S Manual

Page: 168 / 266

TB30s SIP Administrator Guide v1.3
Page 161 of 259
C) Change Notification
Each time service configuration changes, the SIP server sends a NOTIFY
message to communicate the updated service variables to the TB30.
The NOTIFY body directly contains the new profile data.
The NOTIFY request content is set as described above and will only provide
the updated service variables.
For all other service variables, the previous received values still apply.
TB30 will apply the updated service variables and display them to the user
according with MMI NOTIFICATION section below:
MMI Notification
One function key will be affected to each service. Depending on the state of
the service, the corresponding function key‟s LED will be turned ON or OFF.
The Function Keys affected to a Service Supervision will remain inactive if
the user presses them.
Things to know :
 Service Supervision will coexist with User-oriented BLF, but NOT with
List-oriented BLF.
 To simplify the implementation, function keys assigned to Service
supervisin will follow each other. So there will be a block of max 4
function keys.
 The position of the first function key and the order of the keys will be
defined with two new different parameters.
 If within the range allowed to Service Supervision there‟s already a
function key assigned to an extension number or a supervised line, this
key could be skipped or simply erased.
 Once a function key is assigned to Service Supervision, it cannot be
modifiable through the MMI nor the web GUI.
Feature Activation
A) Through the WebGui:
This feature can not be configured through the Web (as mention above).
However you can check the configuration through Advanced – Call Feature –
Function Key Table :