Technicolor TB30 Administrator'S Manual Download Page 124

Page: 124 / 266

TB30s SIP Administrator Guide v1.3

Page 117 of 259

Call Logs

Same as the local phone, there are 3 call logs supported on the web

interface, including

Missed Call log

Received Call log

as well as the

Dialled Call log

You can press the Call logs key from Call dialling page or go to ADVANCED



Call Logs to access the page. Select the check logs by pulling-down the Call

log menu.
The maxium entries in each call log are

In the call log page, you are allowed to delete entry, save entry and call
back to the entry if you want.



Click

to delete the entry



Click

to save the entry in phone book



Click

to access to the call dialling page to make an outgoing call

Phone Book

From the phone book page, the enhancement enable you to delete entry,
modify entry and call back to the entries you want.

You can press the button from call dailling page or go to ADVANCED



Phone book to access the page.



Click

to delete the entry

Summary of Contents for TB30











































































































































































































































































Search results

Summary of Contents for TB30

Reviews:

Related manuals for TB30

Brands by name

Popular brands

Technicolor TB30, Administrator'S Manual

Search results

Summary of Contents for TB30

Reviews:

Related manuals for TB30

Brands by name

Popular brands