Technicolor TB30 Administrator'S Manual Download Page 169

Page: 169 / 266

TB30s SIP Administrator Guide v1.3

Page 162 of 259

B) Through APS:

For this purpose, two new parameters have been included in the [

sys

]

section of the Common/MAC config files, to be able to activate the feature.

[sys]
...

ServiceSupervisionFK

ServiceSupOrder

callfwd

(0)

dnd

(0)

secFilter

(0)

huntgroup

(0)

...

The parameter “

ServiceSupervisionFK

” could be a value from Mu1

(default) to max number of function keys available (10, 38 or 66 if using

extension modules).

The parameter “

ServiceSupOrder

=callfwd(

)dnd(

)secFilter(

)huntgroup(

)

”

could have the following values, where a, b, c, d values can be 0, 1, 2, 3 or



0 means the function is not supervised.



the other values are the order of the function key affected to this

service.

CallFwd

is linked to “

cfu_on

” valiable

DND

is linked to “

dnd

” valiable

SecFilter is linked to “

sf_on

” valiable

HuntGroup is linked to “

hg_rdy

” valiable

For example:

[sys]
Current_Max_Multiline=

ServiceSupervisionFK

ServiceSupOrder

=callfwd(

)dnd(

)secFilter(

)huntgroup(

)

Here,

- Call Forward service

will be supervised on function key 8.

- Do Not Disturb service will be supervised on function key 7.
- Secretarial Filtering

will not be supervised at all.

- Hunting Group

will not be supervised at all.

So, function keys 6, 9 and 10 could be assigned to anything else.

C) Through Telnet:

For this purpose, two new parameters have been created, described as

follow:

sys set

ServiceSupervisionStart

[id]

sys set

ServiceSupervisionOrder

(Value: 0~4,)

To configure, open a command line console, and telnet the phone:

Summary of Contents for TB30











































































































































































































































































Search results

Summary of Contents for TB30

Reviews:

Related manuals for TB30

Brands by name

Popular brands

Technicolor TB30, Administrator'S Manual

Search results

Summary of Contents for TB30

Reviews:

Related manuals for TB30

Brands by name

Popular brands