TC Electronic UpCon Manual Download

Page: 39 / 114

Setting up UpCon

UpCon English Manual (2014-10-07) 36

►

If you cannot access UpCon, please refer to
“Networking basics and troubleshooting” on
page 32.

That’s it – you are now ready to configure and
operate your UpCon.

Updating UpCon software

The latest version of both the UpCon software
and the TC Icon software editor available at the
time of production are supplied with your Up-
Con.

However, from time to time, software updates
are made available by TC, containing both bug
fixes and new features.

Please download and install the most current
version of the TC Icon software from:

tcelectronic.com/support/software/

The TC Icon software is available for

►

Microsoft Windows and

►

Mac OS X.

Using TC Icon software, you can access your
UpCon and update its built-in software (the firm-
ware), which is provided as a separate download.

Updating UpCon firmware is described in “Up-
dating UpCon firmware” on page 74.

Summary of Contents for UpCon



















































































































Search results

Summary of Contents for UpCon

Reviews:

Related manuals for UpCon

Brands by name

Popular brands

TC Electronic UpCon, Manual

Search results

Summary of Contents for UpCon

Reviews:

Related manuals for UpCon

Brands by name

Popular brands