TC Electronic UpCon Manual Download

Page: 78 / 114

Updating UpCon firmware

UpCon English Manual (2014-10-07) 75

You should keep both the TC Icon software
running on your computer and the software
of your UpCon (the firmware) up to date.

Us-

ing up-to-date software versions ensures you
benefit from bug fixes and the latest features.

Updating the firmware of your UpCon re-
quires a computer with the TC Icon software
installed.

In TC Icon, you can select a previously down-
loaded UpCon firmware file (with a “.tca” suffix)
and apply it to the currently selected UpCon.

For downloading, installing and updating

TC Icon

software, please refer to

►

“Finding and installing TC Icon software – Mi-
crosoft Windows” on page 13 or

►

“Finding and installing TC Icon software –
OS X” on page 15.

This section describes downloading and install-
ing the UpCon firmware.

Summary of Contents for UpCon



















































































































Search results

Summary of Contents for UpCon

Reviews:

Related manuals for UpCon

Brands by name

Popular brands

TC Electronic UpCon, Manual

Search results

Summary of Contents for UpCon

Reviews:

Related manuals for UpCon

Brands by name

Popular brands