TAYO ZONTES 310T-M 2022, Maintenance Manual

Page: 61 / 188

61 / 188
b.
将车辆用升降台长高然后用
8#
套筒拆下
M6×10
螺栓
⑴
，取下
6.3×12×1.6
铜垫，将冷却液放出。拧下主水箱
散热器底部的螺钉
⑶
，将冷却液放完，注意不能遗漏
O
环
⑷
。
5. Check whether the fins of the radiator water
tank are deformed or the air duct is blocked
M310
a. Remove the 4 bolts that fix the radiator guard and then
use compressed air or low-pressure water guns, brushes, etc.
to remove dirt, sand, insects and other dirt on the surface of
the radiator. When using compressed air, be careful not to
get too close to the fins. It is forbidden to flush the radiator
directly with a high-pressure water gun to prevent the fins
from deforming and blocking the air duct.
b. Pull the deformed fins straight with a flat engraving
knife or a small flat-blade screwdriver. If the deformed fins
exceed 20%, a new heat sink needs to be replaced.
M125
参照前面步骤将水箱罩拆下后参考
M310
的步骤进行
检修。
注意不要打开此水箱盖，一旦打开冷却液会从此处流出。