TAYO ZONTES 310T-M 2022, Maintenance Manual

Page: 41 / 188

41 / 188
f. Reinstall the engine rear decorative cover.
●The vehicle must be parked on a flat and stable ground or a
lifting platform.
●The operation can only be performed after the engine has
cooled down completely.
● The air filter element is checked every 4000 kilometers or
15 months (whichever comes first), and replaced every 8000
kilometers or 30 months (whichever comes first). The air inlet
sponge filter should be replaced every 4000 kilometers or 15
months (whichever comes first).
●The air filter element and the engine air inlet element
should be cleaned regularly in accordance with the provisions
of the regular maintenance and lubrication table.
●If you often ride in humid or dusty areas, you should check
the air filter element more frequently. Be sure to inspect the
waste oil pipe of the air filter frequently.
●If the filter element is damaged, it must be replaced,
otherwise the dirt will be directed into the engine and cause
damage to the engine.
●Ensure that the filter element is assembled in place.
● If the air filter is clogged with dust, the air intake resistance
will increase and the output power will decrease.
●If the filter element of the engine air intake is blocked by
dust, the air intake resistance will increase, which will reduce
the heat dissipation of the belt and affect the life of the belt.
●If the replacement period is not reached, the surface of the
filter element is clean without damage, and you can use a
dust blow gun to blow air from the clean side of the filter
element to blow away the dust on the surface of the filter
element.
●Do not let water enter the air filter when washing the
vehicle.
Bolts and nuts of muffler
1. Check for air leaks at the engine exhaust.
The models Ⅰ :
The models Ⅱ :
The models
Ⅲ
:
a. If there is a slight air leak, first try to tighten the exhaust
port nut with 6# inner hexagon; if the problem is not solved,
remove the muffler and replace with a new engine exhaust
port gasket.
b. If there is no sign of air leakage, use 6# inner hexagon to
check whether the M8 nut at the exhaust port of the engine
is loose.
2. Check for nut and bolts at the muffler
2.1 The models Ⅰ
Use the 14# sleeve to inspection whether the 3 pcs bolts at
the junction of the rear muffler and the swingarm are loose.
2.2 The models
Ⅱ
Use the 14# sleeve to inspection whether the 2 pcs bolts at
the junction of the rear muffler and the swingarm are loose.
2.3 The models
Ⅲ
Use the 8# inner hexgon socket to inspection whether the 2
pcs bolts at the junction of the rear muffler and the swingarm
are loose.
●Do not touch all metal surfaces of the muffler while the
engine is running or after riding to prevent burns.
●The vehicle must be parked on a flat and stable ground or a
lifting platform.
●If you need to replace the new exhaust port gasket, you
must wait for the muffler to cool down completely before
starting operation.
●Do not blast the throttle for a long time on the spot.
●Large load and long -term low-speed driving will damage the
engine and muffler.
●It is forbidden to use leaded gasoline to avo id the loss of
exhaust gas purification ability due to catalyst failure.