Taylor C832 Service Manual Download Page 35

Page: 35 / 219

McDonald's Intelligap Grills

Controls and Systems

141015

The screen will display “PREP BREAD IN: 000”.
Scroll to the desired selection and press the

key.

The screen will display “PREP ALARM: AUTO”.
Scroll to the desired selection and press the

key.

k. The screen will display “TOP TEMP OFF.”

Pressing the

key will set the TOP TEMP at

150F. To adjust that setting, repeat Steps 2 - 4
from the Remove Gap section on page 25.

The screen will display “BOTTOM TEMP OFF.”

Pressing the

key will set the TOP TEMP at

150F. To adjust that setting, repeat Steps 2 - 4
from the Remove Gap section on page 25.

For items with multiple functions, repeat these
steps until all the functions have been entered.

CLAM SELECTION:

If “CLAM” was selected, after the

is pressed,

the screen will display “GAP STAGES: 0.”

a. If the new item is a multi-gap product, use the

key to change the gap stage to “1” and

press the

key.

b. The screen will display “AM __ PM __”. Use the

keys to select the appropriate option

and press the

key.

c. The screen will display “REMOVE IN 000.” Scroll

to the appropriate time and press the

key.

d. The screen will display “REMOVE ALARM:

AUTO.” Scroll to appropriate selection and press

the

key.

e. The screen will display “REMOVE GAP: 000”. If

the new item is a multi-gap product, use the

keys to enter the product gap

specification. Press the

key.

f. The screen will display “STAGE1 TIME: 000.”

Scroll to the appropriate time and press the

key.

g. The screen will display, “STAGE1 GAP: 000.”

Scroll to the appropriate gap setting and press

the

key.

h. The screen will display “MUST REMOVE IN”.

Scroll to the appropriate selection and press the

key.

The screen will display “PREP BREAD IN”. Scroll

to the appropriate selection and press the
key.

The screen will display “PREP ALARM: AUTO”.
Scroll to the appropriate selection and press the

key.

k. The screen will display “TOP TEMP OFF.”

Pressing the

key will set the TOP TEMP at

150F. To adjust the setting, repeat Steps 2 - 4
from the Remove Gap section on page 25.

The screen will then display “BOTTOM TEMP

OFF.” Pressing the

key will set the TOP

TEMP at 150F. To adjust the setting, repeat
Steps 2 - 4 from the Remove Gap section on
page 25.

For items with multiple functions, repeat these
steps until all the functions have been entered.

m. The screen will display “AUTO SELECTION:

NO”. Scroll to the appropriate selection and press

the

key.

Summary of Contents for C832




























































































































































































































Search results

Summary of Contents for C832

Reviews:

Brands by name

Popular brands

Taylor C832, Service Manual

Search results

Summary of Contents for C832

Reviews:

Brands by name

Popular brands