Taylor C832 Service Manual Download Page 31

Page: 31 / 219

McDonald's Intelligap Grills

Controls and Systems

141020

Remove Alarm

This feature is used to determine if the alarm will be
cancelled automatically or manually.

Step 1

After selecting the item, press the

key until the

screen displays “REMOVE ALARM”.

10:1 - CLAM

REMOVE ALARM: AUTO

Step 2

To change the setting, press the

keys

until the desired setting is displayed.

Press the

key to save the changes.

Remove Gap

The REMOVE GAP feature is the finished gap
height of the selected product.

Step 1

After selecting the item, press the

key until the

screen displays “REMOVE GAP”.

Gap is measured in 1,000th of an inch. In the
example below, the REMOVE GAP setting is 0.265
inch.

10:1 - CLAM

REMOVE GAP: 265

Step 2

To change the setting, press the

keys

to display the correct setting for the first numerical
digit.

Step 3

Press the

key to move the cursor to the next

numerical digit.

Step 4

Repeat this sequence for each numerical digit until
the correct setting is displayed.

Press the

key to save the selection.

Step 5

The Stage 1 Time screen will display. Stage 1 Time
is the amount of time the product will cook during
the first stage of a multi-stage product. (

Note:

Stage

1 timers are only used for multi-stage product.)

10:1 - CLAM

STAGE 1 TIME: .010

Step 6

Repeat Steps 2 - 4 to adjust the time.

Press the

key to save the selection.

Step 7

The Stage 1 Gap screen will display. Stage 1 Gap is
the size of the gap that the product will cook during
the first stage of a multi-stage product. (

Note:

Stage

1 gap is only used for multi-stage product.)

10:1 - CLAM

STAGE 1 GAP: 215

Step 8

Repeat Steps 2 - 4 to adjust the gap.

Press the

key to save the selection.

Summary of Contents for C832




























































































































































































































Search results

Summary of Contents for C832

Reviews:

Brands by name

Popular brands

Taylor C832, Service Manual

Search results

Summary of Contents for C832

Reviews:

Brands by name

Popular brands