manualshive.com logo in svg

Taylor C832, Service Manual

Share
Download
Taylor C832 Service Manual Download Page 101

 95

McDonald's Intelligap Grills

Troubleshooting

Meat Quality Troubleshooting

The product served from the grills is the result of
cook times, temperatures, pressures and
operations. Use the following chart to troubleshoot
poor meat quality and to educate the operator.

PROBLEM

PROBABLE CAUSE

REMEDY

1. Under‐cooked.

a. Freezer burn.

a. Use fresh product.

b. Worn release material.

b. Rotate the release material

daily and change the material
when worn.

c. Improper cook times.

c. Set the time as instructed in

the Operator Manual.

d. Improper cook temperatures.

d. Set the proper temperatures

and calibrate the grill.

2. Over-cooked.

a. Incorrect cook times.

a. Set the time as instructed in

the Operator Manual.

b. Improper meat removal.

b. Remove meat as instructed in

the Operator Manual.

c. Improper cook temperatures.

c. Set the proper temperatures

and calibrate the grill.

3. Improper sear.

a. Worn release material.

a. Rotate the release material

daily and change the material
when worn.

Summary of Contents for C832




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands