manualshive.com logo in svg

Taylor C832, Service Manual

Share
Download
Taylor C832 Service Manual Download Page 32

 26

Controls and Systems

McDonald's Intelligap Grills

141020

Must Remove In

This feature activates an alarm to remind the cook to
remove the product from the grill.

Step 1

After selecting the item, press the 

 key until the

screen displays “MUST REMOVE IN.”

10:1 - CLAM

MUST REMOVE IN: 00

Step 2

To adjust the setting, repeat Steps 2 - 4 from the
Remove Gap section on page  25. 
(

Note

: Factory default is zero.)

Prep Bread In

If enabled, this feature activates an alarm at a set
time before the REMOVE IN time to remind the cook
to toast the buns.

Step 1

After selecting the item, press the 

 key until the

screen displays “PREP BREAD IN.”

10:1 - CLAM

PREP BREAD IN: 000

Step 2

To adjust the setting, repeat Steps 2 - 4 from the
Remove Gap section on page  25.
(

Note

: Factory default is zero.)

Prep Alarm

If the PREP BREAD IN feature is programmed, this
feature is used to select either MANUAL or AUTO.

Step 1

After selecting the item, press the 

 key until the

screen displays “PREP ALARM.”

10:1 - CLAM

PREP ALARM: AUTO

Step 2

To change the setting, press the 

 

 keys

until the desired setting is displayed. 

Press the 

 key to save the changes.

Top Temp/Bottom Temp

This feature is used to adjust the temperature of the
upper platen and lower grill plate.

Step 1

After selecting the item, press the 

 key until the

screen displays “TOP TEMP”.

10:1 - CLAM

TOP TEMP: 425F

Step 2

To adjust the setting, repeat Steps 2 - 4 from the
Remove Gap section on page  25.

Summary of Contents for C832




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands