manualshive.com logo in svg

Taylor C832, Service Manual

Share
Download
Taylor C832 Service Manual Download Page 30

 24

Controls and Systems

McDonald's Intelligap Grills

1141015

Menu Items

After the Service passcode has been entered,
changes to the Menu Items can be made.

IMPORTANT: Changing Numerical Digits in
Menu Items

When making changes to numerical digits, pressing

the 

 

 keys will increase or decrease digits

in single increments. To change the digits in
increments of 10's and 100's, adjust the first digit

using the 

 

 keys and then press the

 key to move the cursor to the next digit.

Repeat this sequence for each digit until the correct
setting is displayed.

IMPORTANT: Exiting Programming Mode

After making and saving a menu item programming
selection, pressing the OK key exits the
programming mode immediately. If the OK key is not
pressed, the display automatically times-out after
3-5 seconds and exits the programming mode.

AM-N PM-Y

This feature is used to select the time of day the
product will be cooked, either in the AM, PM, or
both.

Step 1

After selecting the item, press the 

 key. The

screen will display the item and “AM Y/N   PM Y/N.”

10:1 - CLAM

AM  N            PM  Y

Step 2

To change the setting, press the 

 

 key

until the desired AM or PM selection is displayed.

Press the 

 key to save the selection.

Remove In

The REMOVE IN feature is used to set an alarm to
activate when the product should be removed from
the grill.

Step 1

After selecting the item, press the 

 key until the

screen displays “REMOVE IN __”.

10:1 - CLAM

REMOVE IN: 044

Step 2

To change the setting, press the 

 

 keys

to display the correct setting for the first numerical
digit.

Step 3

Press the 

 key to move the cursor to the next

numerical digit.

Step 4

Repeat this sequence for each numerical digit until
the correct setting is displayed. 

Press the 

 key to save the selection.

Summary of Contents for C832




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands