manualshive.com logo in svg

Taylor C832, Service Manual

Share
Download
Taylor C832 Service Manual Download Page 33

 27

McDonald's Intelligap Grills

Controls and Systems

141020

Step 3

The screen will display “BOTTOM TEMP ___”.

10:1 - CLAM

BOTTOM TEMP: 375F

Step 4

To adjust the setting, repeat Steps 2 - 4 from the
Remove Gap section on page  25.

Auto Selection

This feature is used to determine if the cooking
functions of a product will be automatically selected
or not.

Step 1

After selecting the item, press the 

 key until the

screen displays “AUTO SELECTION”.

Example of a screen:

10:1 - CLAM

AUTO SELECTION: YES

Step 2

To change the selection, press the 

 

 keys

until the desired selection (YES or NO) is displayed.

Press the 

 key to save the changes.

Auto Gap

IMPORTANT!  These settings should not be
changed unless authorized by a Taylor Service
Representative. 

This change should only be

performed to adjust deformed product. Before
attempting to change the product thickness settings,
cook the deformed product in the MANUAL mode.

Step 1

Press the 

 key until the screen displays “AUTO

GAP”. The screen will show two sets of numbers.
The first set of numbers is the minimum gap of the
item. The second set of numbers is the maximum
gap of the item.

10:1 - CLAM

AUTO GAP:     230 TO 330

Step 2

To adjust the setting for the 1

st

 set of numbers,

repeat Steps 2 - 4 from the Remove Gap section on
page  25.

After the OK key was pressed, the cursor moved to
the 2

nd

 set of numbers. Adjust the second set of

numbers and press the OK key.

Programming Optional Menu Items

This feature is used to add optional menu items.

Step 1

Access the Control Menu by entering the Service
Menu passcode, per instructions on page  23.

Step 2

Press the 

 key until the screen displays

“MENU ITEMS”.

Step 3

Press the 

 key to scroll to “ADD ITEM”.

ADD ITEM

Summary of Contents for C832




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands