30
PMT - Rev. 05 - Sep/22
7. Adjustments and operations
Cardan assembly
When assembling the cardan shaft, it is necessary to be careful and leave the terminals
on both ends aligned. The discrepancy of the terminals in 90º will cause vibrations and a
greater wear on the universal joints, reducing the lifetime of the set.
Observe the internal forks alignment
Unaligned internal forks
Correct assembly
Correct assembly
Incorrect assembly
Incorrect assembly
1/3
1/3
2/3
2/3
NOTE
- The contact surface between the tube and the bar shall never be smaller than 1/3 of
its total length.
Summary of Contents for PMT
Page 1: ...OPERATOR S MANUAL PMT PMT...
Page 60: ...58 PMT Rev 05 Sep 22 11 Notes...
Page 62: ...www marchesan com br...
