50
PMT - Rev. 05 - Sep/22
9. Maintenance
Cleaning the pulling rollers
To clean the rollers, proceed as follows:
- Remove the cover (A) by loosening up the bolts (B), flat washers and nuts from the
front support (C);
- Remove the bearings (D) by
loosening up the bolts (E), flat washers
and nuts from the front support (C);
- After removing the bolts (E), pull the rollers
(F) and uncouple them from the gearbox (G);
- Carry out the necessary cleaning on the
rollers (F) and assemble again following the
steps in reverse order;
- If it is necessary to grease the rollers,
follow the instructions on the 'lubrication' page.
C
C
D
D
E
E
F
F
G
G
A
A
C
C
B
B
Summary of Contents for PMT
Page 1: ...OPERATOR S MANUAL PMT PMT...
Page 60: ...58 PMT Rev 05 Sep 22 11 Notes...
Page 62: ...www marchesan com br...
