45
PMT - Rev. 05 - Sep/22
8. Optional
There is an adequate parts kit for the desired spacing when it is necessary to change it.
Remove the components such as the fairing (A), the fairing articulation support (B), the
extensor protection (C) and the nozzle support (D) by loosening up their respective bolts.
Then, carry out the desired spacing between row units as stated on the 'spacings table' and
on the 'procedures to change the spacings' pages.
The side nozzle supports do not need to be replaced as they are positioned correctly.
A
A
D
D
B
B
C
C
Spacings kit
NOTE
- For every spacing, there is a different-sized kit.
- Check the 'spacings table' page to see the allowed spacings between the rows
according to the frame width.
Summary of Contents for PMT
Page 1: ...OPERATOR S MANUAL PMT PMT...
Page 60: ...58 PMT Rev 05 Sep 22 11 Notes...
Page 62: ...www marchesan com br...
