41
PMT - Rev. 05 - Sep/22
7. Adjustments and operations
- Lift the nozzle tip (A) to a position that is easy-
to-access to the fastener (B);
- To adjust the nozzle (A) height, loosen up the bolts
(C) and nut, letting the fastener (D) free;
- Position the bolts (C) on the hole and carry out the necessary alterations to adjust
the nozzle height related to the soil;
- Lastly, return the nozzle (A) to its original position.
Nozzle adjustment
20 cm
20 cm
The equipment leaves the factory with the central and side nozzles height aligned.
Depending on the soil type, the used equipment and the job needs, it is necessary to
adjust the nozzles.
To adjust the central and side nozzles height,
proceed as follows:
- Place the equipment on harvesting position
with a height of around 20 cm from the soil;
A
A
B
B
C
C
D
D
Holes
Holes
ATTENTION
- To finish the adjustment, repeat the same procedures on every row unit.
Summary of Contents for PMT
Page 1: ...OPERATOR S MANUAL PMT PMT...
Page 60: ...58 PMT Rev 05 Sep 22 11 Notes...
Page 62: ...www marchesan com br...
